M-16
We are all about the M-16 and some other guns We are all about the M-16 and some other guns 
Wed. Sep 8, 2010 

Like our website?
Help keep it free of ads
Please donate a dollar or two, Thanks

Sponsored in part by

We offer a number of classes and services. For beginners or the returning shooters The Basic classes cover safety, types for each catagory, operation, loading/unloading, marksmanship and range procedures. All three include range time, classroom materials, and free lifetime consultation for subject material. Family/group discounts are available. We built and now maintain the Lawrence Firearm Training website. And we are proud to have Lawrence Firearm Training as a Sponsor of our website Network

A Member of the Tucson Websites.com Network
Check out our network
of Gun websites

<< Back
Rated 5.91 out of 10 - From 11 votes
Rate the Magpul M-PMAG
Click Here to read
Reviews of Magpul M-PMAG
Magpul M-PMAG
Sat May 23 2009
kilosix4
KiloSix4
Sat May 23 2009
Moving Up in Rating 3 Star Rating 5.91 out of 10
Rated: 5.91 / 10
11 Votes
4472 Views
The new Magpul M-PMAG is an improved version (second generation) of their PMAG (Polymer Magazine). Both versions of the PMAG fit the AR15 / M16 series rifles and most other 5.56x45 firearms which use the AR15 magazine. The PMAG was intended to improve reliability, long-term storage, overall durability with a new design and modern materials. The Magpul M-PMAG holds 30 rounds without any need for downloading to insert properly. Both the original PMAG and new M-PMAG have an Impact Cover that snaps firmly onto the top of the magazine to provide impact protection for the feed lips, dirt/dust intrusion, and eliminating distortion of the feed lips caused by long-term loaded storage. The Original PMAG Impact Cover had a lanyard hole to prevent loss, the newer M-PMAG allows the Impact Cover to clip to the bottom plate of the magazine. The M-PMAG features a special 4 way anti-tilt follower. The PMAG is made out of long fiber reinforced polymer and has a stainless steel spring for corrosion resistance. The Magpul M-PMAG is made in the USA

he new Magpul M-PMAG is an improved version (second generation) of their PMAG (Polymer Magazine). Both versions of the PMAG fit the AR15 / M16 series rifles and most other 5.56x45 firearms which use the AR15 magazine. The PMAG was intended to improve reliability, long-term storage, overall durability with a new design and modern materials. The Magpul M-PMAG holds 30 rounds without any need for downloading to insert properly. Both the original PMAG and new M-PMAG have an Impact Cover that snaps firmly onto the top of the magazine to provide impact protection for the feed lips, dirt/dust intrusion, and eliminating distortion of the feed lips caused by long-term loaded storage. The Original PMAG Impact Cover had a lanyard hole to prevent loss, the newer M-PMAG allows the Impact Cover to clip to the bottom plate of the magazine. The M-PMAG features a special 4 way anti-tilt follower. The PMAG is made out of long fiber reinforced polymer and has a stainless steel spring for corrosion resistance. The Magpul M-PMAG is made in the USA

he new Magpul M-PMAG is an improved version (second generation) of their PMAG (Polymer Magazine). Both versions of the PMAG fit the AR15 / M16 series rifles and most other 5.56x45 firearms which use the AR15 magazine. The PMAG was intended to improve reliability, long-term storage, overall durability with a new design and modern materials. The Magpul M-PMAG holds 30 rounds without any need for downloading to insert properly. Both the original PMAG and new M-PMAG have an Impact Cover that snaps firmly onto the top of the magazine to provide impact protection for the feed lips, dirt/dust intrusion, and eliminating distortion of the feed lips caused by long-term loaded storage. The Original PMAG Impact Cover had a lanyard hole to prevent loss, the newer M-PMAG allows the Impact Cover to clip to the bottom plate of the magazine. The M-PMAG features a special 4 way anti-tilt follower. The PMAG is made out of long fiber reinforced polymer and has a stainless steel spring for corrosion resistance. The Magpul M-PMAG is made in the USA   he new Magpul M-PMAG is an improved version (second generation) of their PMAG (Polymer Magazine). Both versions of the PMAG fit the AR15 / M16 series rifles and most other 5.56x45 firearms which use the AR15 magazine. The PMAG was intended to improve reliability, long-term storage, overall durability with a new design and modern materials. The Magpul M-PMAG holds 30 rounds without any need for downloading to insert properly. Both the original PMAG and new M-PMAG have an Impact Cover that snaps firmly onto the top of the magazine to provide impact protection for the feed lips, dirt/dust intrusion, and eliminating distortion of the feed lips caused by long-term loaded storage. The Original PMAG Impact Cover had a lanyard hole to prevent loss, the newer M-PMAG allows the Impact Cover to clip to the bottom plate of the magazine. The M-PMAG features a special 4 way anti-tilt follower. The PMAG is made out of long fiber reinforced polymer and has a stainless steel spring for corrosion resistance. The Magpul M-PMAG is made in the USA  he new Magpul M-PMAG is an improved version (second generation) of their PMAG (Polymer Magazine). Both versions of the PMAG fit the AR15 / M16 series rifles and most other 5.56x45 firearms which use the AR15 magazine. The PMAG was intended to improve reliability, long-term storage, overall durability with a new design and modern materials. The Magpul M-PMAG holds 30 rounds without any need for downloading to insert properly. Both the original PMAG and new M-PMAG have an Impact Cover that snaps firmly onto the top of the magazine to provide impact protection for the feed lips, dirt/dust intrusion, and eliminating distortion of the feed lips caused by long-term loaded storage. The Original PMAG Impact Cover had a lanyard hole to prevent loss, the newer M-PMAG allows the Impact Cover to clip to the bottom plate of the magazine. The M-PMAG features a special 4 way anti-tilt follower. The PMAG is made out of long fiber reinforced polymer and has a stainless steel spring for corrosion resistance. The Magpul M-PMAG is made in the USA

he new Magpul M-PMAG is an improved version (second generation) of their PMAG (Polymer Magazine). Both versions of the PMAG fit the AR15 / M16 series rifles and most other 5.56x45 firearms which use the AR15 magazine. The PMAG was intended to improve reliability, long-term storage, overall durability with a new design and modern materials. The Magpul M-PMAG holds 30 rounds without any need for downloading to insert properly. Both the original PMAG and new M-PMAG have an Impact Cover that snaps firmly onto the top of the magazine to provide impact protection for the feed lips, dirt/dust intrusion, and eliminating distortion of the feed lips caused by long-term loaded storage. The Original PMAG Impact Cover had a lanyard hole to prevent loss, the newer M-PMAG allows the Impact Cover to clip to the bottom plate of the magazine. The M-PMAG features a special 4 way anti-tilt follower. The PMAG is made out of long fiber reinforced polymer and has a stainless steel spring for corrosion resistance. The Magpul M-PMAG is made in the USA

The M-PMAG features a special 4 way anti-tilt follower. The PMAG is made out of long fiber reinforced polymer and has a stainless steel spring for corrosion resistance. The Magpul M-PMAG is made in the USA

he new Magpul M-PMAG is an improved version (second generation) of their PMAG (Polymer Magazine). Both versions of the PMAG fit the AR15 / M16 series rifles and most other 5.56x45 firearms which use the AR15 magazine. The PMAG was intended to improve reliability, long-term storage, overall durability with a new design and modern materials. The Magpul M-PMAG holds 30 rounds without any need for downloading to insert properly. Both the original PMAG and new M-PMAG have an Impact Cover that snaps firmly onto the top of the magazine to provide impact protection for the feed lips, dirt/dust intrusion, and eliminating distortion of the feed lips caused by long-term loaded storage. The Original PMAG Impact Cover had a lanyard hole to prevent loss, the newer M-PMAG allows the Impact Cover to clip to the bottom plate of the magazine. The M-PMAG features a special 4 way anti-tilt follower. The PMAG is made out of long fiber reinforced polymer and has a stainless steel spring for corrosion resistance. The Magpul M-PMAG is made in the USA  he new Magpul M-PMAG is an improved version (second generation) of their PMAG (Polymer Magazine). Both versions of the PMAG fit the AR15 / M16 series rifles and most other 5.56x45 firearms which use the AR15 magazine. The PMAG was intended to improve reliability, long-term storage, overall durability with a new design and modern materials. The Magpul M-PMAG holds 30 rounds without any need for downloading to insert properly. Both the original PMAG and new M-PMAG have an Impact Cover that snaps firmly onto the top of the magazine to provide impact protection for the feed lips, dirt/dust intrusion, and eliminating distortion of the feed lips caused by long-term loaded storage. The Original PMAG Impact Cover had a lanyard hole to prevent loss, the newer M-PMAG allows the Impact Cover to clip to the bottom plate of the magazine. The M-PMAG features a special 4 way anti-tilt follower. The PMAG is made out of long fiber reinforced polymer and has a stainless steel spring for corrosion resistance. The Magpul M-PMAG is made in the USA  he new Magpul M-PMAG is an improved version (second generation) of their PMAG (Polymer Magazine). Both versions of the PMAG fit the AR15 / M16 series rifles and most other 5.56x45 firearms which use the AR15 magazine. The PMAG was intended to improve reliability, long-term storage, overall durability with a new design and modern materials. The Magpul M-PMAG holds 30 rounds without any need for downloading to insert properly. Both the original PMAG and new M-PMAG have an Impact Cover that snaps firmly onto the top of the magazine to provide impact protection for the feed lips, dirt/dust intrusion, and eliminating distortion of the feed lips caused by long-term loaded storage. The Original PMAG Impact Cover had a lanyard hole to prevent loss, the newer M-PMAG allows the Impact Cover to clip to the bottom plate of the magazine. The M-PMAG features a special 4 way anti-tilt follower. The PMAG is made out of long fiber reinforced polymer and has a stainless steel spring for corrosion resistance. The Magpul M-PMAG is made in the USA

Both the original PMAG and new M-PMAG have an Impact Cover that snaps firmly onto the top of the magazine to provide impact protection for the feed lips, dirt/dust intrusion, and eliminating distortion of the feed lips caused by long-term loaded storage. The Original PMAG Impact Cover had a lanyard hole to prevent loss, the newer M-PMAG allows the Impact Cover to clip to the bottom plate of the magazine.

he new Magpul M-PMAG is an improved version (second generation) of their PMAG (Polymer Magazine). Both versions of the PMAG fit the AR15 / M16 series rifles and most other 5.56x45 firearms which use the AR15 magazine. The PMAG was intended to improve reliability, long-term storage, overall durability with a new design and modern materials. The Magpul M-PMAG holds 30 rounds without any need for downloading to insert properly. Both the original PMAG and new M-PMAG have an Impact Cover that snaps firmly onto the top of the magazine to provide impact protection for the feed lips, dirt/dust intrusion, and eliminating distortion of the feed lips caused by long-term loaded storage. The Original PMAG Impact Cover had a lanyard hole to prevent loss, the newer M-PMAG allows the Impact Cover to clip to the bottom plate of the magazine. The M-PMAG features a special 4 way anti-tilt follower. The PMAG is made out of long fiber reinforced polymer and has a stainless steel spring for corrosion resistance. The Magpul M-PMAG is made in the USA

Magpul M-PMAG

Top of Page

The new Magpul M-PMAG is an improved version (second generation) of their PMAG (Polymer Magazine). Both versions of the PMAG fit the AR15 / M16 series rifles and most other 5.56x45 firearms which use the AR15 magazine. The PMAG was intended to improv

The new Magpul M-PMAG is an improved version (second generation) of their PMAG (Polymer Magazine). Both versions of the PMAG fit the AR15 / M16 series rifles and most other 5.56x45 firearms which use the AR15 magazine. The PMAG was intended to improv

The new Magpul M-PMAG is an improved version (second generation) of their PMAG (Polymer Magazine). Both versions of the PMAG fit the AR15 / M16 series rifles and most other 5.56x45 firearms which use the AR15 magazine. The PMAG was intended to improv

<< Back to the Article List

Comments on the Visitor Comments on Magpul M-PMAG
RE: Magpul M-PMAG
Rating:  5.00 out of 10
Wed. Jul 8, 2009
7: 26 pm

Warning: Missing argument 2 for format_text() in /home/www/m-16/inc/main_functions.php on line 203
I finally got six with windows. It took me a while to figure out how many rounds remained. They are strong and surpriseingly light. They are also a little thinner than their metal/aluminium counter-parts. The only negative is the cheap feel of the plastic, that makes some noise. Will get more.

From:

Add your Comment / Review about Magpul M-PMAG

Your Name:
*Required
Email / Phone:
Title:
Change if desired
Your Comment
or Review:
Thumb Rate

Pros:

Cons:
 
Add your article to our list: Contact us
Not all submissions are included
 Top of Page   
Would you like to support our website?
Help keep our websites free of ads.
Please donate a dollar or two, Thank You

(C) Copyright 2010 M-16™ All Rights Reserved ©
All trademarks, images and articles are property of their respective owners
Questions ? - Please Read Our Policy Page
We are all about the M-16 and some other guns